Levoit VortexIQ 40 User Manual

10
CARE & MAINTENANCE
Battery Installation
Your vacuum uses a 2500mAh Li-ion
battery. On a full charge, the battery lasts
approximately 40 minutes on power level 1.
Use the included charger/charging dock to
charge the vacuum.
Charging the Vacuum
Note:
• To maintain the life of the battery, store
the vacuum in a cool, dry place.
• Store the battery in a semi-charged
state (at least half charged).
1. Turn the vacuum o. Press the Battery
Release Button and remove the battery.
2. To reinstall, slide the battery into the slot
in the vacuum body [Figure 2.1]. There
will be a clicking sound when the battery
is properly installed.
1. Insert the charger into the charging port
on the vacuum body [Figure 2.2].
Figure 2.1
Figure 2.2
Figure 2.3
Note: Make sure the vacuum is turned o
before charging.
Note: Charging time is about 4–5 hours.
2. Plug the charger into an outlet. The
battery indicator lights will blink while
charging [Figure 2.3].
3. When the vacuum is fully charged, the 3
battery indicator lights will turn solid and
turn o after 1 minute.

Levoit VortexIQ 40 Specifications

General

Brush shape	Rectangular
Product type	Stick vacuum
Dust capacity	0.6 L
Product color	Gray
Dust container type	Bagless
Removable handheld vacuum	Yes
Cleaning type	Dry
Vacuum air filtering	HEPA
Dirt separating method	Cyclonic
Air filtration stages quantity	4
Motor power	400 W
Power source	Battery
Charging time	5 h
Suction power	130 AW
Battery voltage	25.9 V
AC input voltage	100 - 240 V
Battery capacity	2500 Ah
AC input frequency	50 - 60 Hz
Maximum input power	- W
Vacuum brushes included	Dusting brush

Weight and Dimensions

Depth	230 mm
Width	250 mm
Height	1170 mm
Weight	3200 g