23
ENGLISH
TROUBLESHOOTING GUIDE
SPECIFICATIONS
Power Supply AC 110-240V~50/60Hz
Speaker Units 2 x 3.5” main speakers
1 x 4“ sub-woofer speaker
Power output 2 x 15W + 1 x 30W, 60RMS
Bluetooth® 2.1 EDR
Effective distance within 10 meters
Working temperature 0°~ +40°
LED display 2 x LED lamps
SYMPTOM
No power.
No sound.
Sound distortion
Bluetooth
®
reception
failure.
SOLUTION
Make sure AC power plug is connected to the wall
socket outlet properly and it has power.
Check that the volume control is NOT at minimum.
Check that it is NOT set to mute.
Make sure that the correct mode has been selected.
Press POWER/SOURCE button repeatedly until
desired mode is reached.
Make sure the sound volume is not too high. Press
VOL- button to reduce the volume.
Make sure the external device is not too far from the
Bluetooth
®
tower.
Make sure both player and tower are set on
Bluetooth
®
mode.
Programming FM radio presets
1. Press and hold “LED/SCAN” button on the remote (10) to search and save
stations in the memory (up to 20 stations). “P01” will blink, then the preset station
frequency number will be displayed.
2. To play the preset Radio Stations, press the “CH-” (11) or “CH+” (12) buttons
on the remote.
BT2000SW_IM1225_V05.indb 23 28/05/2015 17:34
To Next Page
Loading...
Need help?
General
