7 Press the arrow buttons until the correct size appears, and then
press .
Submitting Changes appears, followed by Size.
8 Press the arrow buttons until Type appears, and then press
.
9 Press the arrow buttons until the correct type appears, and
then press .
Submitting Changes appears, followed by Type.
Printing
Printing a document
1 Load paper into a tray or feeder.
2 From the Paper menu, set the Paper Type and Paper Size based
on the paper that is loaded.
3 Do one of the following:
For Windows users
a With a document open, click File ª Print.
b Click Properties, Preferences, Options, or Setup.
c From the Form Source list box, select the source containing
the paper you loaded.
d From the Form Type list box, select the paper type.
e From the Form Size list box, select the paper size.
f Click OK, and then click Print.
For Macintosh users
In Mac OS X:
a Customize the settings as needed in the Page Setup dialog.
1 With a document open, choose File > Page Setup.
2 From the Paper Size pop-up menu, choose a paper size
or create a custom size to match the loaded paper.
3 Click OK.
b Customize the settings as needed in the Print dialog:
1 With a document open, click File > Print.
If necessary, click the disclosure triangle to see more
options.
2 From the print options or Copies & Pages pop-up menu,
choose Printer Features.
3 From the Feature Sets pop-up menu, choose Paper.
4 From the Paper type pop-up menu, choose a paper
type.
5 Click Print.
In Mac OS 9:
a Customize the settings as needed in the Page Setup dialog:
1 With a document open, choose File > Page Setup.
2 From the Paper pop-up menu, choose a paper size or
create a custom size to match the loaded paper.
3 Click OK.
b Customize the settings as needed in the Print dialog:
1 With a document open, choose File > Print.
2 Select a Paper Source option, and then choose the tray
loaded with the appropriate paper.
3 Click Print.
Canceling a print job from the
printer control panel
If the job is formatting or already printing, and Cancel a job
appears:
1 Press the arrow buttons until Cancel appears.
A list of jobs appears.
2 Press the arrow buttons until the job you want to cancel
appears, and then press
.
Note: Once a print job is sent, to cancel a job, press . The
Stopped screen appears. Press the arrow buttons until Cancel
a job appears, and then press .
Maintaining the printer
Replacing the photoconductor
kit
The printer automatically notifies you before the photoconductor
kit reaches a page maximum by showing 84 PC Kit life
warning or 84 Replace PC Kit on the display. You can also
see the status of the photoconductor kit by printing a menu
settings page.
When 84 PC Kit life warning or 84 Replace PC
Kit first appears, you should immediately order a new
photoconductor kit. While the printer may continue to function
properly after the photoconductor kit has reached its official
end-of-life, print quality significantly decreases.
Note: The photoconductor kit is one item only.
1 Open the front door by pressing the button on the left side of
the printer and lowering the front door.
2 Pull the photoconductor kit and toner cartridge out of the
printer as a unit by pulling on the toner cartridge handle.
Note: The photoconductor kit and toner cartridge form a unit.
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
