Electrical specifications
Printer model Electrical specification
MS710, MS711, MS810, MS811, MS812 low‑voltage models 100–127 V at 47–63Hz, nominal
90–137 V, extreme
MS710, MS711, MS810, MS811, MS812 high‑voltage models 220–240 V at 47–63Hz, nominal (not available in all countries)
198–254 V, extreme
MX710, MX711, MX810, MX811, MX812 low‑voltage models 100–127 V at 50–60Hz, nominal
90–137 V, extreme
MX710, MX711, MX810, MX811, MX812 high‑voltage models 220–240 V at 50–60Hz, nominal (not available in all countries)
198–259 V, extreme
Warning—Potential Damage: Do not use voltage converters with printers.
Power requirements
The following table specifies the average nominal power requirements for the base printer, including fuser power.
Lexmark MS710dn, MS711dn, MS810dn, MS810de, MS811dn, MS812dn, and MS812de average nominal
power requirements
State MS710dn MS711dn MS810dn MS810de MS811dn MS812dn MS812de
Average power while printing continuously
Print (simplex) 780 W 800 W 700 W 700 W 770 W 830 W 830 W
Print (duplex) 575 W 600 W 500 W 500 W 560 W 630 W 630 W
Average power while idle
Hibernate mode 0.52 W 0.52 W 0.5 W 0.5 W 0.5 W 0.5 W 0.5 W
Sleep mode 4.8 W 4.8 W 4.8 W 6.0 W 4.8 W 4.8 W 6.5 W
Ready mode (Tier 1) 100 W 100 W 55 W 60 W 55 W 55 W 60 W
Ready mode (Tier 2) 75 W 75 W 30 W 30 W 30 W 30 W 30 W
Off 0.1 W 0.1 W 0.1 W 0.1 W 0.1 W 0.1 W 0.1 W
Lexmark MX710, MX711, MX810, MX811, and MX812 average nominal power requirements
State MX710 MX711 MX810 MX811 MX812
Average power while printing continuously
Print (simplex) 825 W 925 W 760 W 860 W 960 W
Print (duplex) 625 W 725 W 575 W 675 W 775 W
Average power while idle
Hibernate mode 0.7 W 0.7 W 0.7 W 0.7 W 0.7 W
Sleep mode 14 W 15 W 16 W 16 W 16 W
Ready mode (Tier 1) 110 W 110 W 120 W 120 W 120 W
Ready low power mode
(Tier 2)
55 W 55 W 70 W 70 W 70 W
Off 0 W0 W0 W0 W0 W
Printer specifications 17