EasyManuals Logo
Home>Lexmark>All in One Printer>MX310dn

Lexmark MX310dn Compatibility Guide

Lexmark MX310dn
179 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #143 background imageLoading...
Page #143 background image
Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive
at least 1 mm (0.040 inch) away from edges. Adhesive material will contaminate your printer and could void your
warranty.
If zone coating of the adhesive is not possible, a 3mm (0.125inch) strip should be removed on the leading and
driver edge, and a nonoozing adhesive should be used.
Remove a 3mm (0.125inch) strip from the leading edge to prevent labels from peeling inside the printer.
Portrait orientation is preferred, especially when printing bar codes.
Do not use labels that have exposed adhesive.
Do not use labels that are separating from the backing sheet or are wrinkled, bubbled, or otherwise damaged.
Do not load a sheet of labels through the machine more than once.
Load labels into the multipurpose feeder with the recommended print side faceup and the top edge entering the
printer first.
When printing on card stock:
Set Paper Type to Card Stock from the printer driver.
Do not use preprinted card stock manufactured with chemicals that may contaminate the printer. Preprinting
introduces semiliquid and volatile components into the printer.
Do not use creased card stock. It may cause paper jams.
We recommend the use of grain short card stock.
Load card stock into the multipurpose feeder with the recommended print side faceup and the top edge entering
the printer first.
Lexmark X850, X852e, and X854e
Limit label printing to occasional use of paper office labels designed for laser printers. Paper labels are supported in
Tray 1, Tray 2, and the manual bypass feeder.
The following table lists the maximum weights supported.
Note: Scanning large quantities of labels is not recommended.
Printer specifications 143

Table of Contents

Other manuals for Lexmark MX310dn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MX310dn and is the answer not in the manual?

Lexmark MX310dn Specifications

General IconGeneral
Duplex printingYes
Print technologyLaser
Maximum resolution1200 x 1200 DPI
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)33 ppm
Duplex print speed (black, normal quality, A4/US Letter)14 ppm
Finishing optionNo
All-in-one functionsCopy, Fax, Print, Scan
Supported media weight(s)60 - 90 g/m²
Color all-in-one functionsScan
Package dimensions (W x D x H)19.09 x 21.65 x 22.48 \
Supported media weight (imperial)24 lbs
Country of originChina
Maximum duty cycle50000 pages per month
Recommended duty cycle250 - 6000 pages per month
Page description languagesMicrosoft XPS, PCL 5e, PCL 6, PDF 1.7, PostScript 3, PPDS
Copier resize25 - 400 %
Copy speed (black, normal quality, A4)33 cpm
Scanner typeFlatbed & ADF scanner
Maximum scan area216 x 356 mm
Duplex scan speed (black)43 ppm
Duplex scan speed (color)20 ppm
Optical scanning resolution600 x 1200 DPI
FaxingMono faxing
Modem speed33.6 Kbit/s
Fax transmission speed3 sec/page
Total input capacity300 sheets
Total output capacity150 sheets
Maximum input capacity850 sheets
Total number of input trays2
Maximum number of input trays3
Auto document feeder (ADF) input capacity50 sheets
Envelopes sizes7 3/4, 9, 10, DL
Maximum print size-
Paper tray media typesCard stock, Envelopes, Labels, Plain paper, Transparencies
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
DisplayLCD
Display diagonal2.4 \
Market positioningBusiness
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
USB 2.0 ports quantity1
Supported network protocols (IPv4)TCP/IP, AppleTalk, TCP, UDP
Supported network protocols (IPv6)TCP/IP
Internal memory256 MB
Processor frequency800 MHz
Sound pressure level (copying)54 dB
Sound pressure level (printing)53 dB
Sound pressure level (scanning)55 dB
Sound pressure level (duplex printing)52 dB
Power consumption (average operating)- W
Package depth550 mm
Package width485 mm
Package height571 mm
Package weight22500 g
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Mac operating systems supportedMac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion
Other operating systems supportedNovell NetWare 5.x, Novell NetWare 6.x, Novell Open Enterprise Server
Server operating systems supportedWindows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 x64
Sustainability certificatesENERGY STAR
CertificationBlue Angel (RAL-UZ-122), CAN/CSA-C22.2 60950-1, CSA E60825-1, ICES-003 B, BSMI B, CNS 13438, VCCI B, US FDA, FCC B, UL 60950-1, IEC 320-1, EN/IEC 60320-1, CE B, CB IEC 60950-1, EN 62311, EN 60950-1, EN/IEC 61000-3, EN 55022 B, EN 55024, EN/IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, SMA C-tick B, CCC B, CISPIR 22 B, EK Mark, N Mark, ECMA-370, TED
Weight and Dimensions IconWeight and Dimensions
Depth472 mm
Width399 mm
Height468 mm
Weight20000 g

Related product manuals