21
ENG
ENGLISH
CUSTOMIZING SETTINGS
Customizing Settings
Menu Settings
1
Press
MENU
button on the bottom of the Monitor set
to display the
Menu
OSD.
2
Set the options by pressing the ◄ or ► or ▼
buttons.
3
Select the "
Next Menu
" button to enter the more
option settings.
4
Select
EXIT
to leave the OSD menu.
To return to the upper menu or set other menu items,
use the up arrow ( ) button.
Each option is explained below.
Menu Analog Digital HDMI Description
Brightness ● ● ●
To adjust the brightness, contrast of the screen.
Contrast ● ● ●
Response Time
22MP48HQ 24MP48HQ
23MP48HQ
20MP38HQ
27MP48HQ
● ●
You can set a response time for displayed pictures based
on the speed of the screen. For a normal environment, it is
recommended that you use 'Off'. For a fast-moving picture, it
is recommended that you use 'High'.
Wide/Original
● ● ●
Wide
Switch to full screen mode according to input image signal.
Original
Change the input image signal ratio to original.
* This function works only if input resolution is lower than
Monitor set ratio.
Reset
● ● ●
Restore all factory default settings. Press the
◄
,
►
buttons to
reset immediately.
To Next Page
Loading...
Need help?
General
