Remote control
The descriptions in this manual are based on
the buttons on the remote control. Please read
this manual carefully and use the TV correctly. To
install batteries, open the battery cover, replace
batteries (1.5 V AAA) matching the and ends
to the label inside the compartment, and close
the battery cover. Failure to match the correct
polarities of the battery may cause the battery
to burst or leak, resulting in fire, personal injury,
or ambient pollution. To remove the batteries,
perform the installation actions in reverse. This
remote uses infrared light. When in use, it should
be pointed in the direction of the TV’s remote
sensor.
A
B
A
(Power) Turns the TV on or off.
Selects TV or PC mode.
Activates or deactivates the subtitles.
Selects an AV mode.
RATIO Resizes an image.
Selects the input mode.
B
Number buttons Enters numbers.
(Dash) Inserts a dash between numbers such as
2-1 and 2-2.
Accesses the saved channel list.
Alternates between the two last
channels selected. (pressing repeatedly).
Adjusts the volume level.
Accesses your favorite channel list.
Digital signal: Changes the audio language.
Analog signal: Changes the MTS sound.
(MTS : Multichannel Television Sound)
Mutes all sounds.
Scrolls through the saved channels.
Moves to the previous or next screen.
C
D
C
Changes the image mode.
Shows information on the current
program.
Changes the sound mode.
Accesses the main menu.
Accesses the quick menu.
Navigation buttons ( )
Scrolls through menus or options.
Selects menus or options and confirms your
input.
Returns to the previous screen.
Clears all on-screen displays and returns to TV
viewing.
D
Not functional.
Sets the length of time until the TV to turns off.
Control buttons ( , , , , )
Controls the compatible devices (USB).
These access special functions in
some menus.
Adjusts the brightness of
the screen by controlling the screen backlight.
To Next Page
Loading...
