MOUNTING ON A TABLE
1 Lift and tilt the TV into its upright position on a table.
- Leave a 100 mm (3.9 inches) (minimum) space from the wall
for proper ventilation.
100 mm
100 mm
100 mm (3.9 inches)
100 mm
2 Connect the AC-DC Adapter and Power Cord to a wall outlet.
CAUTION
y Do not place the TV near or on sources of heat, as this may result in
re or other damage.
y Please be sure to connect the TV to the AC/DC power adapter
before connecting the TV’s power plug to a wall power outlet.
Using the Kensington security system
(optional)
(This is not available for all models.)
y Image shown may dier from your TV.
The Kensington security system connector is located at the rear of
the TV. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit http://
ww w.kensington.com. Connect the Kensington security system cable
between the TV and a table.
NOTE
y The Kensington security system is optional. You can obtain
additional accessories from your local dealer.
10
ENGLISH
To Next Page
Loading...
Need help?
General
