11
To set Auto Volume
(Settings) • Sound • Auto Volume
Sets Auto Volume to On and volume output from
channel to channel is automatically adjusted for
convenient TV watching when clicking through
different channels.
To use sound test
(Settings) • Sound • Sound Test
Try Sound Test to verify that sound signal output
is normal. When the test sound is normal, check
connected external devices or broadcast signal.
To set up the channels automatically
(Settings) • Channels • Auto Tuning
Memorizes automatically the channels being
broadcast.
• The channels will not be memorized properly if
the antenna/cable is not installed correctly.
• Auto Tuning memorizes the channels that are
currently being broadcast.
• If Lock System is turned on, a pop-up window
will appear asking for password.
To set up the channels at manually
(Settings) • Channels • Manual Tuning
Adjusts channels manually and saves the results.
For digital broadcasting, signal strength, etc. can
be checked.
Editing the channels
(Settings) • Channels • Channel Manager
Edits the saved channels.
To set Language
(Settings) • General • Language
You can select the language of the menu displayed
on the screen and the digital sound broadcasting.
• Menu Language Selects a language for the
display text.
• Audio Language [In Digital mode Only]
Selects the desired language when watching
digital broadcasting containing several voice
languages.
To set current time
(Settings) • General • Time & Date
• Set Automatically
Checks or changes the time while watching TV.
• Synchronizes the TV clock to the digital time
information sent by the TV station.
• Time / Date / Time Zone Sets the time and date
manually if the auto setup does not correspond
to the current time or region.
• Daylight Saving Daylight Saving Time refers to
the practice of setting the clocks forward one
hour from standard time during the summer
months.
To use Sleep Timer
(Settings) • General • Timers • Sleep Timer
Turns off the TV after a prescribed number of
minutes.
• To deactivate the Sleep Timer, select Off.
To turn on/off the TV
(Settings) • General • Timers
• Timer Power On / Timer Power Off
You can set the Power On/Off time for the TV.
• Select Off if you are not going to set Timer
Power On / Timer Power Off.
• To set Timer Power On / Timer Power Off, set
the current time correctly.
Requesting service
(Settings) • General • About This TV
For information on requesting service, refer to the
TV’s menu.
To set Power Indicator
(Settings) • General • Standby Light
Turns on/off the standby light in the front panel of
the TV.
To Next Page
Loading...
Need help?
General
