EasyManuals Logo
Home>LG>Cell Phone>306G

LG 306G Service Guide

LG 306G
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
®
PREPARE YOUR PHONE FOR ACTIVATION
1. REMOVE SCREEN PROTECTORS FROM YOUR PHONE
Remove all protectors from the screen and other locations
on the phone by peeling them off. You will not be able to
see your phone screen until you remove the screen protector.
3. TURN YOUR PHONE ON
4. ACTIVATE YOUR PHONE
To begin your Activation, go to TracFone.com or call 1-800-867-7183
from another phone. You will need the Serial Number located on the
front of this card to complete your Activation.
To complete the Activation process, turn your phone OFF and immediately
back ON. Then, make a call. If your call was not successful, wait a few
minutes and repeat these steps until you are able to make and receive calls.
2. INSTALL THE BATTERY AND BACK COVER.
BEGIN CHARGING YOUR PHONE.
A.
Insert the battery so that the metal bars on the battery are
touching the metal pins on the phone. Put the back cover on.
B.
Locate the Charger/USB dock on the bottom edge of the phone.
Insert the charger’s adapter end into the Charger/USB dock then
plug the charger into an electrical outlet.
TIP: You can Activate your phone while charging. To get the most out of
your battery life, charge your phone for 5 hours during initial setup.
To turn your phone ON, press and
hold the PWR/LOCK key located
on the right edge of your phone
until the screen lights up.
1. Remove protectors from your phone.
2. Install the battery, put the back cover on and begin charging
your phone.
3. Turn your phone ON by pressing and holding the PWR/LOCK key
until the screen lights up.
4. Once Steps 1 – 3 have been completed, you will be ready to Activate.
Go to TracFone.com or call 1-800-867-7183 from another phone.
Find more details inside this card.
Questions? Visit TracFone.com or call 1-800-867-7183.
THE FOLLOWING IS YOUR SERIAL NUMBER:
®
ACARD-TF306G
®
START HERE
PLEASE READ THE TERMS AND CONDITIONS OF SERVICE IN THE
SERVICES GUIDE IN THIS PACKAGE (or at TracFone.com) BEFORE
ACTIVATING YOUR PHONE OR ANY SERVICE PLANS.
1.3 ACTIVATE YOUR TRACFONE
A. Locate your ACTIVATION CARD
and follow the instructions on the card.
If you are a current TracFone customer it’s easy to
transfer your service to another TracFone. To transfer
your service, go to TracFone.com, then select the
Activate Phone tab and select Activate/Reactive.
To keep your existing phone number, select
Transfer
my number and service from one TracFone to
another
and follow the instructions. You will need the
information on the red Activation Card in your package
to continue the Activation process. For additional help,
call the TracFone Customer Care Center at 1-800-867-7183.
B. This Card has the Serial Number you need to Activate your phone.
C. To Activate go to TracFone.com or call 1-800-867-7183 from
another phone.
2. ABOUT TRACFONE SERVICE
2.1 KEEP YOUR SERVICE ACTIVE
2.2
KNOW YOUR SERVICE PLANS AND REFILL OPTIONS
2.3 KNOW YOUR MONTHLY PLAN OPTIONS
2.4 GET PENDING MINUTES AND UPDATES

Other manuals for LG 306G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG 306G and is the answer not in the manual?

LG 306G Specifications

General IconGeneral
BrandLG
Model306G
CategoryCell Phone
LanguageEnglish

Related product manuals