ENGLISH
67
MAKING CONNECTIONS
SIMPLINK Connection
Use the TV remote control to play and control the
AV device connected with the HDMI cable through
HDMI-CEC. Your TV only works with the devices
that support HDMI-CEC. But only devices with the
logo are supported.
Connect one end of the HDMI cable to the HDMI
IN terminal on the rear of the TV and the other end
to the SIMPLINK device.
If the connected device does not support
HDMI-CEC, the SIMPLINK feature is
unavailable.
To operate SIMPLINK, you should use
an High Speed HDMI cable with the CEC
(Consumer Electronics Control) function.
SIMPLINK may not work properly if you a
third-party device that has an HDMI-CEC
function.
NOTE
Activating and Using the
SIMPLINK menus
1
Press
SIMPLINK
to access the SIMPLINK
menus.
2
Press the Navigation buttons to scroll to one of
the devices and press
OK
.
TV
DISC
HD Player
VCR
HD HT 1
HDD Recorder
Speaker
TV Speaker
1
2
3
4
5
No. Description
1
Displays the previously viewed TV channel.
2
Plays discs. When multiple discs are
available, the title of the disc appears at the
bottom of the screen.
3
Controls the connected VCR.
4
HDD recordings playback: Controls the
recording stored in HDD.
5
Changes the audio output between Home
theater speaker and TV speaker for the
connected HTS only.
- A check mark appears in front of the selected
device.
- Available devices display in a bright color.
- Unavailable devices display in grey.
3
Control the selected AV device.
- Direct Play: After connecting AV devices to
the TV, you can directly control the devices
and play media without additional settings.
- Select AV device: Enables you to select one
of the AV devices connected to the TV.
- Disc playback: Control connected AV devices
by pressing the Navigation buttons,
OK
,
,
,
,
and
.
- Power off all devices: When you power off
the TV, all connected devices are turned off.
- Switch audio-out: Offers an easy way to
switch audio-out. (HTS only)
- Sync Power on: When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, The TV will automatically turn
on.
If you change the input source by pressing
INPUT
, the progressing function of the
SIMPLINK device will stop.
If you select a device that has the
home theater feature, the sound output
automatically switches to the home theater
speaker and the TV speaker turns off.
NOTE
To Next Page
Loading...
Need help?
General
Weight and Dimensions
