To Next Page

To Previous Page

- 17 -

TROUBLESHOOTING

1. No power

(1) Symptom

1) Minute discharge does not occur at module.

2) Front LED does not activate.

(2) Press check

Plug in the power cord

Start Check

Yes

Is the power cord

plugged in?

Connect the cable.

Plasma(CN1)

Yes

Are the line filter and

PSU connected?

Replace the fuse.

Yes

Is the

correct fuse for

the PSU in place?

LCD(F100)

Connect the 13-14pin cable.

Next remove all cables connected to the PSU and

switch the AV voltage to manual.

If the ST-by 5V does not operate, replace the PSU.

Yes

Is the

PSU and 13-14pin

cable connected to the

VSC board?

Questions and Answers:

Need help?

Do you have a question about the LG 32LC42 and is the answer not in the manual?

LG 32LC42 Specifications

General

Comb filter	3D
Display diagonal	32 \
Display brightness	450 cd/m²
Display resolution	1366 x 768 pixels
Display technology	LCD
Native aspect ratio	16:9
Supported video modes	1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Contrast ratio (typical)	5000:1
Display number of colors	16.78 million colors
Display language	D/NL/GB/F/I/ES/DK/N/FIN/RO/SLO/CZ/CRO/PL/HU/SCG/BG/RUS/UA/KWT/EST/LV/LT
Power requirements	100-240V
RMS rated power	20 W
Number of speakers	2
Equalizer bands quantity	5
Tuner type	Analog
Channels quantity	100 channels
RGB ports quantity	1
Power consumption (sleep)	1 W
Power consumption (typical)	150 W
Product color	Black

Weight and Dimensions