11
Antenna/Cable
Connect an antenna, cable, or cable box to watch TV while referring to the following. The illustrations may differ from the actual items and an RF
cable is optional.
• Make sure not to bend the copper wire of the RF cable.
Copper wire
• Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV.
• To improve the picture quality in a poor signal area, purchase a signal amplifier.
• Use a signal splitter to use 2 TVs or more.
• If the antenna is not installed properly, contact your dealer for assistance.
How to use the ferrite core
Use the ferrite core to reduce the electromagnetic interference in the power cord. Wind the power cord on the ferrite core once.
(Depending on model)
(Wall side) (TV side)
10cm (+ / -2cm)
To Next Page
Loading...
Need help?
General
