BACK COVER FOR WIRE ARRANGEMENT
■
Image shown may differ from your TV.
7
ENGLISH
Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp
section.
1
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as shown.
2
NOTE
GG
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
CABLE MANAGEMENT CLIP
Connect the cables as necessary.
To connect additional equipment, see the
EExxtteerrnnaall eeqquuiippmmeenntt SSeettuupp
section.
1
Install the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
as shown.
2
CABLE MANAGEMENT CLIP
42PG60
**
50PG60
**,
50/60PG70
**
Fix the
CCaabbllee HHoollddeerr
as
shown and bundle the
cables.
Hold the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
with both hands
and pull it upward.
HHooww ttoo rreemmoovvee tthhee ccaabbllee mmaannaaggeemmeenntt cclliipp
50PG60
**,
50/60PG70
**
42PG60
**
Separate CABLE MANAGEMENT
from TV by pressing two latches.
For the 42PG60** model, press the center of the
CCAABBLLEE MMAANNAAGGEEMMEENNTT CCLLIIPP
and then lift it .