ENGLISH
35
[Change PIN Code]
This feature enables you to set the password you use to enter the Installation menu.
1 Enter your current password.
2 Enter a new 4-digit password.
3 Enter the same password again in the Confirm Password field for confirmation.
[Enterprise Settings]
• Enter your company account code to apply the corresponding enterprise settings.
• When your code has been entered, the monitor set gets reset, thereby applying the corresponding enterprise
settings.
• This feature does not get activated if a code has already been entered.
[Reset to Initial Settings]
Resets all items except for the Q Start items (functions related to the language, screen direction, external input, time,
and power) and other items to their initial settings.
[Factory Reset]
This feature resets the items applicable for Reset to Initial Settings, Date, Time, Language, Network IP, and the Input
Label Internal Storage files.
However, Calibration mode's RGB gain is an exception.
NOTE
• It keeps the existing settings because the Off / On button in the User menu only affects the active / inactive status
of the submenu.
To Next Page
Need help?
General
