- 6 -
LGE Internal Use OnlyCopyright © LG Electronics. Inc. All rights reserved.
Only for training and service purposes
SPECIFICATION
NOTE : Specifications and others are subject to change without notice for improvement
.
1. Application range
This specification is applied to the LED TV used LA68H
chassis.
2. Requirement for Test
Each part is tested as below without special appointment.
(1) Temperature: 25 °C ± 5 °C(77 °F ± 9 °F), CST: 40 °C ± 5 °C
(2) Relative Humidity: 65 % ± 10 %
(3) Power Voltage
: Standard input voltage (AC 100-240 V~, 50/60 Hz)
* Standard Voltage of each products is marked by models.
(4) Specification and performance of each parts are followed
each drawing and specification by part number in
accordance with BOM.
(5) The receiver must be operated for about 5 minutes prior to
the adjustment.
3. Test method
(1) Performance: LGE TV test method followed
(2) Demanded other specification
- Safety : CE, IEC specification
- EMC : CE, IEC
4. Model General Specification
No. Item Specication Remarks
1 Receiving System ATSC / NTSC-M / 64 QAM / 256 QAM
2 Available Channel
1) VHF : 02~13
2) UHF : 14~69
3) DTV : 02-69
4) CATV : 01~135
5) CADTV : 01~135
3 Input Voltage AC 110V, 60HZ Mark : 110V, 60Hz (N.America)
4 Market North America
5 Screen Size
43/49 inch Wide (1920 × 1080) FHD / 60Hz
43LF5400-UE
49LF5400-UE
40 inch Wide (1920 × 1080) FHD / 60Hz 40LH5300-UA
6 Aspect Ratio 16:9
7 Tuning System FS
8 Module Direct
NC430EUN-AACR1 LGD
FHD / 60Hz
43LF5400-UE
NC490EUN-AACR1 LGD 49LF5400-UE
NC400DUE-VXCP3 INX 40LH5300-UA
9 Operating Environment
1) Temp : 0 ~ 40 deg
2) Humidity : ~ 80 %
10 Storage Environment
1) Temp. : -20 ~ 60 deg
2) Humidity : ~ 85%