ENGLISH
29
ENTERTAINMENT
ENTERTAINMENT
Connecting USB storage devices
Connect USB storage devices such as a USB
flash drive or external hard drive to the TV and use
multimedia features. (See “Browsing files” on p. 30)
Connect a USB flash drive or USB memory
card reader to the TV as shown in the following
illustration.
USB IN
To disconnect a USB storage device, make sure to
end the connection properly to prevent damages
to the TV or files.
1
Press
Q.MENU
to access the quick menus.
2
Press the Navigation buttons to scroll to
Eject
USB
and press
OK
.
3
Disconnect the USB storage device only when
the message says that it is safe to remove.
Do not turn the TV off or remove a USB
storage device while the USB storage
device is connected to the TV, as this could
result in loss of files or damage to the USB
storage device.
Back up your files saved on a USB storage
device frequently, as you may lose or
damage the files and this is not covered by
the warranty.
CAUTION
Tips for using USB storage devices
The TV recognizes only a USB storage
device.
If you connect a USB storage device to the
TV through a USB hub, your TV may not
recognize the USB storage device.
The TV may not recognize a USB storage
device that requires a special driver.
The recognition speed of a USB storage
device may differ depending on the device.
Only use a USB storage device which has
normal music or image files.
Use only USB storage devices that are
formatted as a FAT 32 or NTFS file system.
You may need to connect a USB storage
device to an external power supply with a
power adapter.
If the TV does not recognize a connected
USB storage device, replace the cable and
try again. Do not use an excessively long
cable.
The TV does not support some USB storage
devices properly.
You can use a multi-partition (up to 4) USB
storage device.
The file alignment method of a USB storage
device is similar to the one of Window XP.
You cannot create or delete a folder saved in
a USB storage device directly on the TV.
The number of characters for a file name is
up to 100 English characters.
If there are too many folders and files in one
folder, it may not operate properly.
The recommended capacity for a USB
external hard disk is 1 TB or less and for a
USB storage device is 32 GB or less.
If a USB external hard disk with the Energy
Saving feature does not work, turn the USB
external hard disk off and on again to make
it work properly. For more information, refer
to the user manual of the USB external hard
disk.
The electrostatic can cause USB device’s
malfunction. In this case, USB Device has to
be plugged again.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
