LG 43UN7000PUB User Manual

ENGLISH_Index
12
Registering Magic Remote Control
How to register the Magic Remote Control
To use the Magic Remote, rst pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV off and back on.
How to deregister the Magic Remote Control
Press the (BACK) and (HOME) buttons at the same time, for
ve seconds, to unpair the Magic Remote with your TV.
* Press and hold the button for more than 5 seconds to disconnect
and re-register the Magic Remote at the same time.
• Do not mix new batteries with old batteries. This may
cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery
may cause the battery to burst or leak, resulting in re,
personal injury, or ambient pollution.
• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
• Batteries inside or inside the product shall not be exposed
to excessive heat such as sunshine, re or the like.
User Guide
For more information about this TV, read the USER GUIDE embedded in
the product.
• To open the USER GUIDE [Support] [User Guide]
Troubleshooting
Cannot control the TV with the remote control.
• Check if anything such as tape has been placed over the receiver.
• Check if there is any obstacle between the product and the remote
control.
• Replace the batteries with new fresh ones.
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns o suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the auto-o function is activated in the settings menu.
• If there is no signal while the TV is on, the TV will turn o
automatically after 15 minutes of inactivity.

LG 43UN7000PUB Specifications

General

Screen Type	led
Color	black
Wall Mount	200mm x 200mm
Features	4k upscaler, hdr dynamic tone mapping, double step noise reduction, sharpness enhancer, advanced color enhancer, true color accuracy
Tuner	digital
Screen Size	42.5 inches, 43 inches
Screen Technology	standard led
Resolution	4k (2160p)
Refresh Rate	60hz
Closed Captioning	yes
Motion Enhancement	trumotion 120
HDR	yes
HDR Format	hdr 10, hybrid log-gamma (hlg)
Built-In Speakers	true, downward firing
Surround Sound	ultra surround
Speakers Output	20 watts
HDMI Ports	3
HDMI 2.1 Ports	0
HDMI ARC Ports	yes
USB Ports	2
USB 2.0 Ports	3
Ethernet	yes
RF Antenna	yes
Network	built-in wi-fi, ethernet
Headphones Output	no
Digital Optical Audio Outputs	1
Component Video Inputs	0
Composite Video Inputs	1
DVI	0
SmartTV	webos
Streaming Services	apple tv+, paramount+, crackle, disney+, fandango, google play movies & tv, hulu, netflix, pandora, peacock, prime video, redbox, showtime, sirius, starz, sling tv, spotify, twitch, vudu, youtube, youtube tv, iheartradio
Smart Applications	google assistant, amazon alexa, apple homekit
Other Devices Connection	mobile to tv
Voice Assistant	no
Remote Control	standard
3D	no
Power Consumption	93 kilowatt hours
Depth with Stand	8.5 inches
Height with Stand	24.7 inches
Width with Stand	38.4 inches
Net Weight with Stand	18.5 pounds
Depth without Stand	3.2 inches
Height without Stand	22.6 inches
Net Weight without Stand	18.3 pounds