10
ENGLISH
Connecting the Speakers
- For certain models only.
- The image may be different according to the
model.
1 Connect an input signal cable before installing
the speakers.
3 Connect the speaker cables noting the correct
polarity. Use cable holders and cable ties to
organize the speaker cables.
2 Mount the speakers by using screws as
shown below. Make sure the power cable is
disconnected before making a connection.
Connecting IR & Light Sensor
When you connect the cable to the product, the
feature for receiving remote control signals is
activated. The IR & light sensor is magnetic. Attach
it to the front edge of the product for use.
[Front]
• Please turn off the power before removing the
cable. Connecting or removing the speaker
cable while turned on may result in no sound.
NOTE
CAUTION CAUTION
• The signal strength of the IR and Light sensor
will decrease if the sensor is not placed in front
of the product.
NOTE
To Next Page
Loading...
Need help?
General
