LG 49SJ810V User Manual

12
ENGLISH
D
Returns to the previous level.
* Clears on-screen displays and returns to last input viewing.
Shows programme guide.
2
,
3
Streaming Service buttons Connects to the Video
Streaming Service.
(INPUT) Changes the input source.
- Pressing and holding the button displays all the lists of
external inputs.
3
(Q. Settings) Accesses the Quick Settings.
- Pressing and holding the button displays the All Settings
menu.
, , , These access special functions in some
menus.
Teletext buttons ( , ) These buttons are used for
teletext.
* Provides content related to the programme you are
currently watching.
By zooming in on the selected area, you can view it in
full screen.
* You can zoom in on the area where the remote control is
pointed.
Registering magic remote
How to register the magic remote
To use the Magic Remote, rst pair it with your TV.
1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV off and back on.
How to deregister the magic remote
Press the and (HOME) buttons at the same time, for ve
seconds, to unpair the Magic Remote with your TV.
* Pressing and holding the button will let you cancel and re-
register Magic Remote at once.
Licenses
Supported licenses may dier by model. For more information about
licenses, visit www.lg.com.
(Only UJ75**, SJ80**, SJ81**,
SJ85**, SJ93**, SJ95**)
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This oer is valid for three (3) years from the date
on which you purchased the product.
External control device
setup
To obtain the external control device setup information, please visit
www.lg.com.

LG 49SJ810V Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	49 \
Display brightness	- cd/m²
Display technology	LED
Display diagonal (metric)	123 cm
Supported graphics resolutions	3840 x 2160
Motion interpolation technology	-
Hybrid Log-Gamma (HLG)	Yes
Annual energy consumption	92 kWh
Tuner type	Analog & digital
Digital signal format system	DVB-C, DVB-S2, DVB-T2
RF ports quantity	2
HDMI ports quantity	4
Card reader integrated	No
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity	1
Package depth	158 mm
Package width	1193 mm
Package height	770 mm
Package weight	16900 g
Product color	Silver, White
Panel mounting interface	300 x 300 mm
Cables included	AC
Audio formats supported	AAC, AC3, DTS, EAC3, HE-AAC, MP2, MP3, PCM, WMA
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	66 W
Power consumption (PowerSave)	0.8 W
RMS rated power	20 W

Weight and Dimensions

Depth (with stand)	248 mm
Width (with stand)	1100 mm
Height (with stand)	699 mm
Weight (with stand)	14100 g
Depth (without stand)	62 mm
Height (without stand)	641 mm
Weight (without stand)	12700 g