LG 50LF6100 User Manual

8
ENGLISH
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope or cable. Make sure to keep
the rope parallel to the flat surface.
CAUTION

Make sure that children do not climb on or hang
on the TV.
NOTE

Use a platform or cabinet that is strong and large
enough to support the TV securely.

Brackets, bolts, and ropes are optional. You can
obtain additional accessories from your local
dealer.
Mounting on a Wall
An optional wall mount can be used with your LG
Television. Consult with your local dealer for a wall
mount that supports the VESA standard used by
your TV model. Carefully attach the wall mount
bracket at the rear of the TV. Install the wall mount
bracket on a solid wall perpendicular to the floor. If
you are attaching the TV to other building materials,
please contact qualified personnel to install the wall
mount. Detailed instructions will be included with
the wall mount. We recommend that you use an LG
brand wall mount. When you do not use LG’s wall
mount bracket, use a wall mount bracket where
the device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
10 cm
10 cm
10 cm
(4 inches)
Make sure to use screws and wall mounts that meet
the VESA standard. Standard dimensions for the wall
mount kits are described in the following table.
Mounting on a Table
(Image shown may differ from your TV.)
1
Lift and tilt the TV into its upright position on a
table.
- Leave a 10 cm (4 inches) (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
10 cm
10 cm
(4 inches)
2
Connect the power cord to a wall outlet.
CAUTION

Do not place the TV near or on sources of heat,
as this may result in fire or other damage.
Using the Kensington Security
System (optional)
(Depending upon model)
The Kensington security system connector is located
at the rear of the TV. For more information of
installation and using, refer to the manual provided
with the Kensington security system or visit http://
www.kensington.com. Connect the Kensington
security system cable between the TV and a table.
NOTE

The Kensington security system is optional. You can
obtain additional accessories from your local dealer.
Securing the TV to a Wall (optional)
(Depending upon model)

LG 50LF6100 Specifications

General

Screen shape	Flat
Response time	- ms
Display diagonal	50 \
Display brightness	- cd/m²
Native refresh rate	60 Hz
LED backlighting type	-
Supported video modes	1080p
Screen format adjustments	16:9
Supported graphics resolutions	1920 x 1080 (HD 1080)
Motion interpolation technology	TruMotion 120 Hz
3D	No
Annual energy consumption	83 kWh
Operating system version	4.5
Operating system installed	NetCast OS
Audio decoders	Dolby Digital, DTS
RMS rated power	20 W
Number of speakers	2
HDMI ports quantity	3
DVI-D ports quantity	0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Consumer Electronics Control (CEC)	SimpLink
Audio formats supported	AAC, AC3, HE-AAC, MP2, MP3, PCM, RA-Lossless, WMA
Image formats supported	JPG, JPS, MPO
Video formats supported	DIVX HD
Product color	Black
Panel mounting interface	400 x 400 mm
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Package depth	152.4 mm
Package width	1196.34 mm
Package height	759.46 mm
Package weight	17700 g
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	254 mm
Height (with stand)	708.66 mm
Weight (with stand)	14200 g
Depth (without stand)	55.88 mm
Width (without stand)	1127.76 mm
Height (without stand)	652.78 mm
Weight (without stand)	13800 g