To Next Page

To Previous Page

- 15 -

TROUBLESHOOTING

1. No power

(1) Symptom

1) Minute discharge does not occur at module.

2) Front LED does not activate.

(2) Press check

Plug in the power cord

Start Check

Yes

Is the power cord

plugged in?

Connect the cable.

Plasma(CN1)

Yes

Are the line filter and

PSU connected?

Replace the fuse.

Yes

Is the correct fuse for

the PSU in place?

Plasma(F101)

Connect the 13-14pin cable.

Next remove all cables connected to the PSU and

switch the AV voltage to manual.

If the ST-by 5V does not operate, replace the PSU.

Yes

Is the PSU and 13-

14pin cable connected

to the VSC board?

Questions and Answers:

Need help?

Do you have a question about the LG 50PC51 and is the answer not in the manual?

LG 50PC51 Specifications

General

3D	No
Depth	88 mm
Height	827.2 mm
Equalizer	Yes
Pixel pitch	- mm
Product color	Black
RMS rated power	- W
Display diagonal	50 \
Depth (with stand)	370 mm
Display brightness	1500 cd/m²
Display resolution	1366 x 768 pixels
Display technology	Plasma
Power requirements	100-240V, 50/60Hz
Width (with stand)	1242 mm
Height (with stand)	887.6 mm
Weight (with stand)	39300 g
SCART ports quantity	1
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Contrast ratio (typical)	-
Equalizer bands quantity	5
Digital vertical frequency	100 Hz
Display viewable area (HxV)	1106 x 622 mm
Power consumption (standby)	1 W
Power consumption (typical)	450 W