29
MAKING CONNECTIONS
y
The external device connection
may differ from the model.
y
Connect external devices to the TV
regardless of the order of the TV
port.
y
If you record a TV programme on a
DVD recorder or VCR, make sure
to connect the TV signal input cable
to the TV through a DVD recorder
or VCR. For more information
of recording, refer to the manual
provided with the connected device.
y
Refer to the external equipment’s
manual for operating instructions.
y
If you connect a gaming device to
the TV, use the cable supplied with
the gaming device.
y
In PC mode, there may be noise
associated with the resolution,
vertical pattern, contrast or
brightness. If noise is present,
change the PC output to another
resolution, change the refresh
rate to another rate or adjust the
brightness and contrast on the
PICTURE menu until the picture is
clear.
y
In PC mode, some resolution
settings may not work properly
depending on the graphics card.
NOTE
Antenna connection
ANTENNA /
CABLE IN
Wall Antenna
Socket
*Not Provided
Connect the TV to a wall antenna
socket with an RF cable (75 Ω).
y
Use a signal splitter to use more
than 2 TVs.
y
If the image quality is poor, install
a signal amplifier properly to
improve the image quality.
y
If the image quality is poor with
an antenna connected, try to
realign the antenna in the correct
direction.
y
An antenna cable and converter
are not supplied.
y
Supported DTV Audio: MPEG,
Dolby Digital, Dolby Digital Plus,
HE-AAC
NOTE
To Next Page
Loading...
General
