GG
LG recommends the following headset models.
-Mono/Stereo : Nokia : BH501 / Jabra : BT620s /
Sony : DR-BT30Q / Philips : SHB7100 / Plantronics :
Pulsar590 / Motorola : HT820 / Motorola : S9 / LG :
HBS200
-Only Mono : Motorola : H800 / Jabra : BT250v /
Jabra : BT2040 / Plantronics : Discovery665 / Nokia :
BH-900 / Sony Ericsson : HBH-GV435 / Samsung :
WEP500 / LG: Prada HBM-510
There might be an audio delay, depending on the
buffer memory size of the headset.
GG
The stereo/mono headset officially certified to be
Bluetooth compatible can be searched and connect-
ed.
GG
The stereo/mono headset that supports the A2DP
or HSP function among the Bluetooth devices can be
connected.
GG
If the surrounding environment of the TV is as fol-
lows, the device may not be searched or connected
properly.
-If there is strong electromagnetic wave.
-If there are many Bluetooth devices.
-If the headset is turned off, not in place or has an
error.
-Because products such as microwave oven, wireless
LAN, plasma light, gas range etc., use the same fre-
quency range, it can cause communication error.
GG
Only one Bluetooth headset can be connected at
once.
GG
Connection that is lost due to the TV being turned
off etc. will not be automatically recovered. Try con-
necting the applicable device again.
GG
Some operations can be slower while operating the
headset.
GG
Even if you choose simplink Home Theater after using
the headset during Simplink operation, the unit will
not automatically switch to Home Theater speakers.
GG
When the headset connection continuously fails, pair
the device one more time.
GG
The audio quality of mono headsets will not be as
good as that for stereo headsets.
GG
Mono headsets may suffer from noise as the distance
from the TV increases, because they use a different
transmission method compared with stereo headsets.
GG
When a Bluetooth headset is in use, the Volume +/-
and Mute keys do not work, and the Audio menu
returns to the default value and is disabled.
GG
With Bluetooth set to On, if any registered devices
are turned on, the TV will switch to Bluetooth mode
automatically even though you are watching in anoth-
er input mode. In this case, set Bluetooth to Off.
When the Bluetooth menu is "On" and there is a connection request from
the headset, this message is dispalyed.
Not all headsets support the this feature.(Refer to the user manual of the
applicable Bluetooth headset.)
Some headset types may make an attempt at connection when they
are turned off/on even though they are not included in the
Registered Device list.
Do you want to connect your headset?
Yes No
1
To Next Page
Loading...
Need help?
General
