11
ENGLISH
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
* When the TV is turned on for the first time after being shipped from the factory, initialization of
the TV may take up to one minute.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
f Do not use any unapproved items to ensure the safety and product’s lifespan.
f Any damages or injuries by using unapproved items are not covered by the warranty.
f Some models appear to have a thin film on the screen. It is actually part of the screen; do not
remove it.
CAUTION
f The items supplied with your product may vary depending upon the
model.
f Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
f For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm (0.39 inches) thick and 18 mm
(0.7 inches) width.
f Use an extension cable that supports USB 2.0 if the USB cable or
USB flash drive does not fit into your TV’s USB port.
NOTE
B
A
A
B
*A 10 mm (0.39 inches)
*B
18 mm (0.7 inches)
To Next Page
Loading...
Need help?
General
