69
Settings
n
Note
PIN: Personal Identification Number.
Connection Menu 9.5
Network Selection (Menu 9.5.1)
The Network Selection feature allows you to indicate
how the network you will use is selected when
roaming outside your home area.
Options are: Automatic, Manual and Preferred.
n
Note
You can select a network other than your home network
only if it has a valid roaming agreement with your home
network.
] Automatic: Allows you to set the phone to
automatically search for and select one of the
cellular networks available in your area. The phone
will be set to Automatic by default.
] Manual: Allows you to select the desired network
manually from a list of networks. If the connection
to the manually selected network is lost, the phone
will sound an error tone and ask you to select a
network again. The selected network must have a
roaming agreement with your home network, that is,
the operator whose SIM card is in your phone. The
phone lets you select another network if the phone
fails to access the selected network. If you switch
off the phone, the phone will be reset to Automatic.
] Preferred: You can set a list of preferred networks
the handset should attempt to register with first,
before attempting to register to any other networks.
This list is created from the handset’s predefined list
of known networks.
GPRS Attach (Menu 9.5.2)
If you select Power On and you are in a network that
supports packet data, the phone registers to the GPRS
network and sending short messages will be done via
GPRS. Also, starting an active packet data connection,
for example, to send and receive e-mail, is quicker. If
you select When Needed, the phone will use a packet
data connection only if you start an application or
action that needs it. The GPRS connection is closed
after it is not used by any application.
n
Note
If there is no GPRS coverage and you have chosen Power
On, the phone will periodically try to establish a packet data
connection.
To Next Page
Loading...
Need help?
General
