To Next Page

To Previous Page

ENGLISH

INSTALLATION

Ceiling-Type Installation

WARNING

When installing the product on the ceiling, observe the following precautions

to prevent the projector from falling:

— It is recommended to install the product through a professional installation

services provider. (If installing on the ceiling, modify the projector’s PJT Mode

settings)

— Do not use adhesive, lubricant, oil, etc. when using the mounting equipment.

— Do not tighten the screws with an excessive force since the projector may fall

due to breakage of the screw connection part.

— Standard screw: M4 x 8 mm, M6 x 10 mm, 1/4-20 UNC x 5 mm

(Applicable screw types may vary depending on the model.)

— Recommended torque: 5-8kgf.cm

• A failure to follow the precautions may result in injury or death and product

damage due to the fall of the product.

Questions and Answers:

Need help?

Do you have a question about the LG CineBeam Al ThinQ HU710PW and is the answer not in the manual?

LG CineBeam Al ThinQ HU710PW Specifications

General