Operating30
Operating
3
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
3. Select time mode by pressing C/V on the
remote control.
- AM 12:00 (for an AM and PM display) or 0:00
(for a 24 hour display)
4. Press SET on the remote control to conrm your
selection.
5. Select the hours by pressing C/V on the
remote control.
6. Press SET on the remote control.
7. Select the minutes by pressing C/V on the
remote control.
8. Press SET on the remote control.
Setting the Clock through
“Music Flow Bluetooth” App
Install “Music Flow Bluetooth” app on your Android
device. (Page 21-22)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth connection
through “Music Flow Bluetooth” app.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM on the remote control.
3. Press C/V on the remote control to change
the hours and minutes and press SET on the
remote control to save.
4. Press C/V on the remote control to select
function and press SET on the remote control to
save.
- Press C/V on the remote control to select a
preset number when you select tuner and then,
press SET on the remote control.
If there is no preset number, this step is skipped.
5. Press C/V on the remote control to change
the volume and press SET on the remote control
to save. The clock icon “(“ shows that the alarm
is set.
y If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
y You can set alarm after you set the clock
time.
y If you set the clock time and alarm, you
can check the alarm icon “(“ by pressing
CLOCK on the remote control even when the
player is turned off.
y If you set the clock time and alarm, you
can check the alarm icon “(“ and setting
information by pressing ALARM on the
remote control even when the unit is turned
off.
y You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
,
Note
To Next Page
Loading...
Need help?
General
