LG CM4620 User Manual

Operating16
Operating
3
Radio Operations
Be sure that FM/AM aerial is connected.
(Refer to the page 12)
Listening to the radio
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM or AM appears in
the display window.
The last received station is tuned in.
2. Press and hold TUNING-/+ on the remote
control or
Y/U
on the unit for about two
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING-/+ on the remote control or
Y/U
on the unit repeatedly.
3. Adjust the volume by rotating volume knob on
the unit or by pressing VOL +/- on the remote
control repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or
FUNC. on the unit until FM/AM appears in the
display window.
2. Select the desired frequency by pressing
TUNING-/+ on the remote control or
Y/U
on the unit.
3. Press PROGRAM/MEMORY a preset number
will flash in the display window.
4. Press PRESET·FOLDER
W
/
S
to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen to a preset station, press
PRESET·FOLDER
W
/
S
or 0 to 9 numerical
buttons.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “ERASE ALL” will flash up on the unit
display.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.
Improving poor FM reception
Press
T
ST./MO. on the unit or
d
/
M
on the
remote control. This will change the tuner from
stereo to mono and usually improve the reception.

LG CM4620 Specifications

General

Brand	LG
Model	CM4620
Category	Stereo System
Language	English