28 OPERATION
OPERATION
WARNING
• o redce the ris of fire electric shoc or inr to persons read the F efore
operating this appliance.
Using the Dryer
1
2
3
4
5
6
Clean the Lint Filter
f the lint filter has not alread een cleaned lift ot the filter and remove the
lint from the last load. his ill help ensre the fastest and most efficient drin
performance. ae sre to reinstall the filter pressin don ntil it clics firml
into place.
Load the Dryer
Load the dryer with the wet laundry from the washer. If the load is extra large,
you may need to divide it into smaller loads for proper performance and fabric
care.
Turn on the Dryer
Press the Power button to turn on the dryer. The cycle LEDs will illuminate and
a chime will sound.
Select a Cycle
Turn the cycle selector knob either direction until the LED for the desired cycle
is on. The preset temperature, dry level, and option settings for that cycle will be
shown. Default settings for the selected cycle can now be changed if desired.
Refer to the Cycle Setting and Options page for details.
NOTE
• ot all options or modifiers are availale on all ccles. efer to the cle
Guide page for default settings and available options. A different chime will
sound and the LED will not come on if the selection is not available.
Begin Cycle
Press the Start/Pause button to begin the cycle. The cycle can be paused at
any time either by opening the door or by pressing the Start/Pause button. If
the cycle is not restarted within 60 minutes of being paused, the dryer will shut
off and the settings will be lost.
End of Cycle
hen the ccle is finished the chime ill sond. mmediatel remove or
clothing from the dryer to reduce wrinkling. If Wrinkle Care is selected, the dryer
ill tmle rie ever fe mintes to help prevent rinles from settin in the
clothes.
To Next Page
Loading...
Need help?
General
