LG DLGX2651W User Manual

ENGLISH
BEFORE CALLING FOR SERVICE (cont.)
Problem Possible Causes Solutions
Steamdoesn’t
generate but no error
code is shown
• Waterlevelerror.
• Unplugdryerandcallforservice.
Garments still
wrinkled after
STEAMFRESH
™
• Toomanyortoodifferent
types of garments in dryer.
• Smallloadsof1to5itemsworkbest.
• Loadfewergarments.Loadsimilar-typegarments.
There are no creases
left on garment after
STEAMFRESH
™
• Thefunctionofthiscycle
is to remove wrinkles from
fabric.
• Useanirontomakecreases.
Garments have
static after REDUCE
STATIC
• Thisisnormal.
• Dependsonindividualmoisturelevelinskin.
Garments are too
damp or too dry after
REDUCESTATIC
• Correctdryingoptionsnot
selected.
• Selectloadweightmanuallybeforestarting
REDUCE STATIC option.
Garments are not
uniformly damp after
EASYIRON
• Numberofgarmentsorload
size not properly selected at
the beginning of the cycle.
• Selectthecorrectnumberorgarmentsorload
size before starting the cycle.
Water drips from door
duringSteamCycle
• Thisisnormal.
• Condensationwillnormallyformontheinside
of the dryer door during steam operation. Some
condensation may drip out the bottom of the door.
Steamisnotvisible
duringSteamCycle
• Thisisnormal.
• Steamvaporisdifculttoseewhenthedooris
closed. However, condensation will normally form
on the inside of the dryer door if the steam system
is operating normally.
Drum does not turn
duringSteamCycle
• Thisisnormal.
• Thedrumisturnedoffsothatthesteamvapor
remains in the drum. The drum will normally turn
for about 2 seconds once a minute.
Cannot see steam
vapor at the
beginning of cycle
• Thisisnormal.
• Steamisreleasedatdifferentstagesofthecycle
for each option.
• MORETIMEbuttonpressed.
Odors remain in
clothing after
STEAMFRESH
™
• STEAMFRESH
™
did not
remove odor completely.
• Fabricscontainingstrongodorsshouldbe
washed in a normal cycle.
• Thisdisplayindicatesthatthesteamoptionhas
been set for a “ ” item such as a comforter.
Press the LESS TIME button to reduce the
indicated load size.
FLOWSENSE
indicator light is on
during the drying
cycle
• Ductworkistoolongorhas
too many turns/restrictions.
• Signicantblockageofthe
ductwork due to lint buildup
or debris.
•Theappliancehasdetected
a restriction in the external
dryer venting.
• Installashorterorstraighterductrun.Seethe
Installation Instructions.
• Ductworkshouldbechecked/cleanedsoon.
Dryer can be used in this condition, but drying times
may be longer.
• IfexhaustrestrictionsaresensedbytheFLOW
SENSE system, the indicator will remain on for two
hours after the end of the cycle. Opening the door or
pressing the POWER button will turn off the display.
CHECK FILTER light
is on during the
drying cycle
• Lintlterisalmostclogged
or full.
• Pausethedryingcycleandcleanthelintlter.
The display shows
41
MFL67408111_EN_111004.indd 41 2011.10.4 10:41:3 AM

LG DLGX2651W Specifications

General

Brand	LG
Model	DLGX2651W
Category	Dryer
Language	English