LG DLGX4201W User Manual

16 INSTALLATION
Reversing the Door
(DLEX4500*, DLGX4501*)
WARNING
THE DRYER DOOR IS VERY LARGE AND
HEAVY. Failure to follow the instructions
below can result in damage to the dryer,
property damage or injury to persons.
• To avoid damage to the dryer or the door,
support the door with a stool or box that fits
under the door, or have an assistant support
the weight of the door.
• Always reverse the door BEFORE stacking
the dryer on top of the washer.
• Avoid dropping the door to avoid damage to
the door or the floor.
1
Open the dryer door.
Open Door
2
You will be removing the screws shown below
(6 on left, 4 on right).
3
Remove the four decorative screws on the left
using a screwdriver.
Decorative
Hinge
Screw
4
Remove the two latch screws and the latch.
Latch Screw
CAUTION
Be sure to support the weight of the door
before removing the hinge screws.
5
Hold the hinge in place while removing the
four hinge screws (to prevent the door from
dropping).
Hinge Screw
6
Remove the door from the cabinet cover.
Remove
Door

LG DLGX4201W Specifications

General

Type	front load; gas
Color	white (w), black steel (b)
Dryer Capactity	7.4 cu. ft.
Number of Cycles	14
Number of Options	12; more time, less time, damp dry signal, wrinkle care, control lock, wi-fi, energy saver, turbosteam™, reduce static, remote start, drum light, signal
Drying Levels	very dry, more dry, normal dry, less dry, damp dry
Venting	electric: 4 way venting / gas: 3 way venting; vented
Temperature Settings	high, med.high, medium, low, ultra low; 5
Control Panel	digital and knobs
Cycle Signal	yes
Interior Light	yes
Drying Rack	no
Sensor Dry Option	yes
Sanitize Option	yes
Steam	turbosteam™; yes
Smart Home	yes
Remote Control	yes
Wi-Fi	yes
Voltage	120 volts
Current	15

Weight and Dimensions

Depth	30 1/8 inch
Height	39 inch
Width	27 inch
Net Weight	125.3 lbs