LG E1940S User Manual

11
Control Panel Functions
AUTO Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO button before entering the On Screen
Display(OSD). (Only Analog Mode)
This will automatically adjust your display image to
the ideal settings for the current screen resolution
size (display mode).
The best display mode is
E1940T : 1360 x 768
E2040T : 1600 x 900
E2240T/E2340T : 1920 x1080
INPUT Button
Use this button to turn the display on or off.
The power indicator stays white if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking white.
Power Button &
Power Indicator
When two input signals are connected, you can select the
input signal (D-SUB/DVI) you want. When only one signal
is connected, it is automatically detected. The default
setting is D-Sub.
(SOURCE Hot key)
Exit the OSD(On Screen Display).
EXIT Button

LG E1940S Specifications

General

3D	No
Pixel pitch	0.3 x 0.3 mm
Aspect ratio	16:9
Display diagonal	19 \
Display resolution	1366 x 768 pixels
Viewing angle, vertical	160 °
Contrast ratio (dynamic)	-
Contrast ratio (typical)	1000:1
Display number of colors	16.78 million colors
Viewing angle, horizontal	170 °
Digital vertical frequency	56 - 75 Hz
Digital horizontal frequency	30 - 61 kHz
Display brightness (typical)	250 cd/m²
Supported graphics resolutions	1366 x 768
DVI-I ports quantity	0
Certification	UL(cUL) TUV-GS: TUV-Type SEMKO FCC-B, CE
Product color	Black
Plug and Play	Yes

Weight and Dimensions

Weight (with stand)	2400 g
Width (without stand)	- mm
Weight (without stand)	2100 g