15
ow to use washer
H
• Press the Power button to start.
• Press the Start/Pause button.
• Initial conditions
- Wash : main wash
- Rinse : 3 times
- Spin :
• 1400 rpm
[F1422TD(1~9)]
• 1200 rpm
[F1222TD(1~9)]
• 1000 rpm
[F1022TD(1~9) / WD-MD810]
- Water temperature : 60˚C
- Program : Cotton
• Press the Power button to start.
• Select the conditions which you want to use,
by turning the program dial and pressing
each button.
For selecting the each conditions, please refer to
the page16~page21
• Press the Start/Pause button.
1. Cotton automatically
selected upon power on.
2. Manual Selecting
3. Beep on/off
• The Beep on/off function can be set only
during the washing cycle.
• To set the Beep On/Off function follow the
below steps.
1. Turn on the washing machine (by pressing
the Power button).
2. Press the Start/Pause button.
3. Press and hold the Time Delay button
simultaneously for three seconds to set
Beep on/off function.
• Once the Beep on/off function is set, the
setting is memorized even after Power is off.
To Next Page
Loading...
Need help?
General
