LG F1443KD Series User Manual

23
ow to use washer
H
Rinse Temp. ------
1:31
Time Left
Tub Clean
Tub Clean is a special cycle to clean the inside of the washing machine.
A higher water level is used in this cycle at higher spin speed. Perform this cycle regularly.
1. Remove any clothing or items from the
washer and close the door.
2. Open the dispenser drawer and add Anti
limescale(e.g. Calgon) to the main wash
compartment.
3. Close the dispenser drawer slowly.
4.
Power On and then press and hold Rinse
and Temp. button for 3 seconds. then “Tub
Clean” will be displayed on the LCD display.
5. Press the Start/Pause button to start.
6. After the cycle is complete, leave the door
open to allow the washer door opening,
flexible gasket and door glass to dry.
Do not add any detergent to the detergent compartments.
Excessive suds may generate and leak from the washer.
If there is a child, be careful not to leave the door open for too long.
CAUTION
•
“Door Lock” - For safety reasons, the
door will lock while machine is in use and the
“Door Lock” icon will light up. You can safely
open the door after the “Door Lock” icon
turns off.
•
While "Detecting" is shown on the
display the washing machine rotates slowly
and detects how much laundry is loaded in
the drum.
It will take a short time.
1%
Rinse Temp. 60°C3
- - -
Time Left
Detecting
B
A
■ Tub Clean
■ Door Lock & Detecting

LG F1443KD Series Specifications

General

Brand	LG
Model	F1443KD Series
Category	Washer
Language	English