24
• Spin Speed level can be selected by
pressing 'Spin' button repeatedly.
1. Press the Power button.
2. Press the Spin button to select RPM.
3. Press the Start/Pause.
Spin only
• Time Save : This option can be used to
reduce the time of a wash program.
• Intensive : If the laundry is normal and
heavily soiled, “Intensive” option is effective.
• Rinse
+
: Add rinse once.
• Rinse Hold :
• Rinse Hold is selected by pressing the
spin button repeatedly this function leaves
clothes in the machine; suspended in the
water after a rinse without entering into
spin.
• To proceed through to a drain or spin.once
the rinse hold function is completed using
to Program dial and Spin button to the
required program. (Spin)
Option
Spin
■ Options ■ Other functions
• By pressing the Temp. button the water
temperature can be selected.
- Cold
- 30°C, 40°C, 60°C, 95°C
• Water temperature can be selected
according to the program.
Temp.
1. Press the Power button.
2. Select the Refresh program.
3. Press the Steam Wash button
repeatedly until the correct item is
displayed.
4. Press the Start/Pause button.
Refresh Cycle
How to use washer
NOTE
For better performance load 3 item or
less.
When Refresh cycle finishes, laundry
will continue to be tumbled slowly for
up to 30 minutes to prevent wrinkling.
You can open the door in this time by
pressing any button.
When you select "No Spin", it will still
rotate for a short time with low speed to
drain quickly.
NOTE
To Next Page
Loading...
Need help?
General
