25
The Beep on/off function can be set only during the washing cycle.
1. Press
the
Power button.
2. Press the Start/Pause button.
3. Touch and hold the Temp. and Spin button
simultaneously for three seconds to set Beep
on/off function.
Once the Beep on/off function is set, the setting
is memorized even after the power is turned off.
Locking the control panel
1. Touch and hold
the
Child Lock button for
3 seconds.
2. A beeper will sound, and ' ' will appear on
the LED display.
When the child lock is set, all buttons are
locked except the Power button.
Select this function to lock the buttons on the control assembly to prevent tampering.
"Child Lock" can be set only during the washing cycle.
Unlocking the control panel
1. Touch and hold
the
Child Lock button for
3 seconds.
2. A beeper will sound and the remaining time
for the current programme will reappear on
the LED display.
■ Child Lock
■ Beep On / Off
How to use washer
NOTE
•
Turning off the power will not reset the
child lock function. You must deactivate
child lock before you can access any
other functions.
NOTE
•
If you want to turn the Beeper off,
simply repeat this process.
To Next Page
Loading...
Need help?
General
