42
EN
Symptoms Reason Solution
Water does not
enter washing
machine or it enters
slowly
Water supply is not adequate in
that location.
• Check another tap in the house.
Water supply tap is not
completely open.
• Fully open tap.
Water supply hose(s) are
kinked.
• Straighten hose.
The lter of the supply hose(s)
clogged.
• Check the lter of the supply hose.
Water in the
washing machine
does not drain or
drains slowly
Drain hose is kinked or
clogged.
• Clean and straighten the drain hose.
The drain lter is clogged. • Clean the drain lter.
Washing machine
does not start
Electrical power cord may not
be plugged in or connection
may be loose.
• Make sure plug ts tightly in wall outlet.
House fuse blown, circuit
breaker tripped,or a power
outage has occurred.
• Reset circuit breaker or replace fuse.
Do not increase fuse capacity. If
problem is a circuit overload, have it
corrected by a qualied electrician.
Water supply tap is not turned
on.
• Turn on water supply tap.
Washing machine
will not spin
Check that the door is rmly
shut.
• Close the door and press the Start/
Pause button. After pressing the
Start/Pause button, it may take a few
moments before the washing machine
begins to spin. The door must be
locked before spin can be achieved.
Add 1 or 2 similar items to help balance
the load. Rearrange load to allow
proper spinning.
To Next Page
Loading...
Need help?
General
