67
Calls
To set up a conference call
Contact your wireless service provider to find out whether they support
conference calls and how many participants you can include.
1. Place a call to the first participant.
2. When you’re connected, tap the Add call button
on the Call screen.
3. Use the keys on the dialpad to manually enter a phone number, then tap
the Call Key
.
4. After you’re connected, tap the Merge calls button
. The participant is
added to the conference call.
Merge Calls Button
Tap here to merge the separate
calls into a conference call.
Speaker Button
Tap here to turn the
speakerphone on (or off). The
light bar illuminates when the
speakerphone is on.
Dialpad Button
Tap here to dial another number to
participate in the conference call.
Bluetooth Button
Tap here to switch between a
Bluetooth device and the phone. The
light bar illuminates to indicate that
the call is using a Bluetooth device.
The button is greyed out when there
is no Bluetooth device available.
Mute Button
Tap here to mute the microphone during a call.
The light bar illuminates when the microphone is
muted.
Listening to Your Voicemail
When you have a new voicemail message, the Voicemail notification icon
appears in the Status Bar. If you have not set up your voicemail number,
or if you need to change it, you can do that in the Call settings.
To listen to your Voicemail
Open the Notifications panel and tap New voicemail.
OR
T
ap the Voicemail icon
on the Home screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
