LG GF-LN500PL User Manual

17
INSTALLATION
ENGLISH
should be held firmly whilst the connector is
pushed onto the pipe.
2 Ensure that the rubber washer is fitted to the
inside of the tap connector before screwing it
onto the tap.
• A separate connector or adaptor may need
to be purchased if your tap fitting does not
match the thread size of the connector
provided.
Checking the Water Connection
1 Turn on the water supply and switch on the
appliance. Carefully check all fittings for
possible leaks due to poorly fitted hoses.
2 Press and hold the Water Filter button for
three seconds. The new water filter has been
activated.
3 Place a cup under the water dispenser to verify
that water is flowing through the appliance.
4 Check the connecting tube and joints for leaks
once again.
Levelling and Door
Alignment
Before Beginning
When the appliance doors appear to be uneven,
follow the instructions below to align the doors.
NOTE
• The spanner may differ depending on the model.
You will be provided with either spanner type A
or B.
- Spanner Type A
- Spanner Type B
Levelling the Appliance
The appliance has two front levelling legs. Adjust
the legs to alter the tilt from front to back or side to
side. If the appliance seems unsteady, or the doors
do not close easily, adjust the appliance’s tilt using
the instructions below.
It is quite normal for the appliance to have a
backward lean even when the front legs are turned
all the way.

LG GF-LN500PL Specifications

General

Brand	LG
Model	GF-LN500PL
Category	Refrigerator
Language	English