14
Adjusting the Height of the
Door
If the door of the appliance is not level, adjust the
difference in the height of appliance door using the
following method.
NOTE
•
Because the hinge pin may falll out, do not adjust
the height of the appliance door more than 5 cm.
[Method 1]
* Reference
Keeper nut
Spanner
1
Loosen the keeper nut by rotating it
counterclockwise using a 19 mm spanner.
To loosen
2
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise with
an 8 mm spanner.
3
After adjusting the difference in the height of
the appliance door, fasten the keeper nut by
rotating it clockwise.
To tighten
If it is impossible to adjust the height of the
appliance door through the above method, level
the door according to the following guide.
[Method 2]
If the freezer compartment door is lower than
the fridge compartment door
Level the door by inserting at(-type) driver into
groove of the left height adjusting screw and rotate
it clockwise.
If the freezer compartment door is higher
than the fridge compartment door
Level the door by inserting at(-type) driver into
groove of the right height adjusting screw and
rotate it clockwise.
To Next Page
Loading...
Need help?
General
