Operating14
Operating
3
Operations
DRC (Dynamic Range Control)
Make the sound clear when the volume is turned
down and prevent sudden increase of sound
(Dolby Digital only). Set to [DRC ON] by using DRC.
Turn off the sound temporarily
Press (Mute) to mute your unit.
You can mute your unit, for example, to answer
the telephone, “MUTE” is displayed in the display
window.
To cancel it, press (Mute) again on the remote
control or change the volume level.
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use
A/D
to scroll up and down through the
delay amount, which you can set at anything
between 0 and 300 ms.
Displaying input information
You can display various information by pressing
INFO.
OPTICAL: Audio format, Audio channel
Bluetooth: Address of connected Bluetooth
device
Sleep timer setting
This unit will be turned o automatically by your
timer set.
Press SLEEP repeatedly to select the desired time
period options (in minutes):
DISPLAY OFF (display window will turns o) ->
DIMMER (display window will be darkened by half )
-> Sleep timer value (180 ~ 10) -> Display on
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
You can check the remaining time before the
unit turns o . Press SLEEP the remaining time
appears in the display window.
,
Note
Adjusting the brightness of
the display window
It helps you to watch TV without interruptions due
to the light from the display window of this unit.
DISPLAY OFF
Select DISPLAY OFF to turn o the display window
of this unit. If you input the buttons of the unit or
the remote control, display shows the status of the
unit and then turns o again after several seconds.
DIMMER
Select DIMMER to dim the display window.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
