12 INSTALLATION
Ambienf Temperafure
Install this appliance in an area where the
temperature is between 55°F (13°C) and 110°F
(43°C). If the temperature around the appliance
is too low or high, cooling ability may be
adversely affected.
Measuring fhe Clearances
Too small of a distance from adjacent items
may result in lowered freezing capability and
increased electricity consumption charges.
Allow at least 24 inches (61 cm) in front of
the refrigerator to open the doors, and at
least 2 inches (5 cm) between the back of the
refrigerator and the wall.
24" (61 crn)
t
2" (5 cm)
Removing/Assembling fhe
Refrigerator Door Handles
-iq- _ NOTE
emoving the doors is always
ecommended when it is necessary to
eve the refrigerator through a narrow
pening. If it is necessary to remove the
andles, follow the directions below.
Removing fhe Handles
Loosen the set screws D with a s/s2in.
Allen wrench and remove the handle.
Loosen the mounting fasteners _ that
connect to the refrigerator door and handle
using a 1/4in. Allen wrench, remove the
mounting fasteners.
Assembling 1"he Handles
1 Assemble the mounting fasteners D at
both ends of the handle using a _/4in.
Allen wrench.
2
Place the handle on the door by fitting
the handle footprints over the mounting
fasteners and tightening the set screws
with a s/szin. Allen wrench.
To Next Page
Loading...
Need help?
General
