39OPERATION
ENGLISH
underneath the back half of the shelf. Pull the
front of the shelf forward to return to a full shelf.
• Glass shelves are heavy. Use special care when
removing them.
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
Detaching/Assembling the Shelf
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
1 To detach, tilt up the front of the shelf and lift
the shelf straight up.
2 Pull the shelf out.
3 To assemble, tilt the front of the shelf up and
guide the shelf hooks into the slots at a
desired height.
4 Lower the front of the shelf so that the hooks
drop into the slots.
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
InstaView
This feature is only available on some models.
InstaView Door-in-Door
Knock twice on the glass to turn the LED light
inside the InstaView on or off. The LED light turns
off automatically after 10 seconds.
• The LED light does not turn on if the right
refrigerator door is open.
•The InstaView function will not activate for two
seconds after closing the door.
•The InstaView function is disabled when the ice
dispenser is in use.
InstaView Door-in-Door
Compartment
The InstaView function on the Door-in-Door
compartment lets you view the contents of the
compartment without opening the door.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
