7
OPERATION
ENGLISH
OPERATION
1 32
4
1
POWER / DELAY OFF BUTTON
Power Button Function
•
Button will turn power on and off for
entire hood (fan and lights).
•
Hood will remember the last speed and light
level it was turned off at.
(Example: Press the
button to turn off
the hood with fan speed at level 4 and lights
on high. Press the
again and the hood
will turn on with the fan speed set to 4 and the
lights on high.)
Delay Off Button Function
•
With the fan on, press and hold the
button for three seconds. The fan will change
to speed 1 and the 5 minute delay off timer
will start.
+ LEDs will illuminate
and slowly blink in accordance with the time
remaining until the fan and lights automatically
turn off.
•
Pressing the
button while the Delay
Off Function is enabled will turn the hood off
and cancel the Delay Off Function.
2
SPEED SELECTION BUTTON
Fan Speed Decrease Button
•
Press this button to decrease fan speed. 5, 4,
3, 2, 1.
•
If fan is On at level 1 and this button is
pressed, fan will power Off.
Fan Speed Increase Button
•
Press this button to increase fan speed. Fan
On, 1, 2, 3, 4, 5.
•
If hood is Off and this button is pressed, fan
will turn On at level 1.
3
LIGHT BUTTON
•
The light has two levels: High and Low.
•
From off, press one time for High. Press again
for Low. Press again to power lights off.
•
Press and hold the Light button for 3 seconds
to connect to a home Wi-Fi network. See
page 8 for more information.
4
DISPLAY INDICATORS
Mesh Filter Clean Reminder (always enabled)
•
After 30 hours of fan usage, the
button
indicator will begin to slowly blink indicating it
is time to clean the mesh filters.
•
To reset: With hood off: hold the
button
for three seconds. All LED indicators will blink
two times confirming the 30 hour timer has
been reset.
To Next Page
Loading...
Need help?
General
