17
EN
Ventilation
Push the ventilation lever in to the closed position
to maintain the best cooling performance. Pull the
ventilation lever out to open the vent and draw
fresh air into the room.
Air Direction
Airflow can be adjusted by changing the direction
of the air conditioner’s louvers.
Adjusting Horizontal Airflow
Direction
The horizontal airflow is adjusted by moving the
levers of the vertical louvers to the left or right.
Adjusting Vertical Airflow
Direction
Touch the horizontal louvers to adjust the airflow
up or down.
NOTE
• When the weather is extremely hot, the unit
may turn off automatically to protect the
compressor.
Additional Features
Slinger Fan
This air conditioner is equipped with a slinger fan.
(See drawing.)
The fan’s outer ring picks up the condensed water
from the base pan if the water level gets high
enough. The water is then picked up by the fan
and expelled through the condenser, making the
air conditioner more efficient.
RingRing
Drain Pipe
In humid weather, excess water may cause the
base pan to overflow. To drain the water, remove
the drain cap and secure the drain pipe to the rear
hole of the base pan.
Press the drain pipe into the hole by pushing down
and away from the fins to avoid injury.
Hang
Push
CAUTION
• Be careful when inserting the drain pipe. Push
away from the sharp fin area to avoid slipping
injuring yourself.