LG M228WD-BZ User Manual

24
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Automatically adjusts picture position and minimizes image
shaking.After adjustment, if the image is still not correct,
your set is functioning properly but needs further adjust-
ment.
AAuuttoo ccoonnffiigguurree
This function is for the automatic adjustment of the screen
position, clock, and phase. The displayed image will unstable
for a few seconds while the auto configuration is in progress.
Press the
MMEENNUU
button and then use
D
or
E
button
to select the SCREEN menu.
Press the
G
button and then use
D
or
E
button to
select Auto Config..
Press the
G
button to start Auto Config..
• When Auto Config. has finished, OK will be shown
on screen.
• If the position of the image is still not correct, try
Auto adjustment again.
• If picture needs to be adjusted more after Auto adjust-
ment in RGB, you can adjust the Manual Config..
Press the EXIT button to disappear the menu window.
Auto Configure (RGB mode only)
Auto Config. G
Manual Config.
SXGA Mode
Aspect Ratio
Reset
To Set
1
3
2
1
2
3
4
Auto Config.
Manual Config.
SXGA Mode
Aspect Ratio
Reset
SETUP
O
PICTURE O
Prev.
MENU
Move
AUDIO O
TIME O
OPTION O
SCREEN O

LG M228WD-BZ Specifications

General

Brand	LG
Model	M228WD-BZ
Category	Monitor
Language	English