Connecting6
Connecting
2
About detachable
control panel
Attaching the control panel
1. Align the left side of the panel with the
stopper.
2. Push the right side of panel into the
unit until it clicks.
The control buttons may not work
properly if the control panel is not
attached properly. If this occurs,
gently press the display.
Do not leave the control panel
in any area exposed to high
temperatures or direct sunlight.
Do not drop the control panel
or otherwise subject it to strong
impact.
Do not allow such volatile agents
as benzine, thinner, or insecticides
to come into contact with the
surface of the control panel.
>
Caution
Detaching the control panel
1. Press the
6
to open the control
panel.
2. Lift the control panel slightly.
3. Push the control panel to right.
6
5
4. Pull the control panel out of the unit.
5. Put the detached control panel into
the protective case.
Control panel
Protective Case
Periodically wipe the contacts on
the back of the control panel with a
cotton swap moistened with alcohol.
For safety, turn o the ignition before
cleaning, and remove the key from the
ignition switch.
,
Note
To Next Page
Loading...
Need help?
General
