1-5
1) File Name
Model Name NB3530A
Micom Update Filename MICOM_NB3530_1301030_0xFE5C.hex
ESS Update Filename DSP_NB3530_1212261_7613.rom
Wireless Rx/Tx Module Update Filename WIRELESS.BIN
Wireless Rx Micom Update Filename WIRELESS_MICOM.HEX
Touch Key Filename TOUCH1_NB3530.DLD
2) File Name is in uppercase letters only.
3) PROGRAM DOWNLOAD
1. AUDIO MICOM
BOOTING Ö FUNCTION DISPLAY Ö USB FUNCTION Ö CONNECTING THE USB
Ö “MICOM UP” DISPLAY Ö AFTER UPDATE , THE SET POWER OFF AUTOMATELY.
2. DSP
BOOTING Ö FUNCTION DISPLAY Ö USB FUNCTION Ö CONNECTING THE USB Ö “DSP UP” DISPLAY
Ö AFTER UPDATE , THE SET POWER OFF AUTOMATELY.
3. TOUCH
BOOTING Ö FUNCTION DISPLAY Ö USB FUNCTION Ö CONNECTING THE USB
Ö “T-UP 00” ~ “T-UP 90” DISPLAY Ö AFTER UPDATE , THE SET POWER OFF AUTOMATELY.
SERVICE INFORMATION FOR EEPROM
• FACTORY RESET: SET(STOP KEY) + REMOCON “2”
[ AUDIO MICOM OPTION CODE SETTING ]
SET(STOP KEY) + REMOCON “2” (MORE THAN 5 SECONDS) Ö CHANGE OPTION CODE WITH THE AR-
ROW KEY (REPEAT, PLAY/PAUSE, SKIP KEY) AND PRESS REMOCON STOP KEY Ö SET(STOP KEY) +
REMOCON “2” Ö COMPLETED.
UPDATE PROGRAM
To Next Page
Loading...
Need help?
General
