Operating 17
Operating
3
Basic operations
USB operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing FUNCTION
on the remote control or F on the unit until the
function is selected.
To Do this
Stop Press
Z
.
Playback Press
d/M
.
Pause
During playback, press
d/M
.
Skip to the next/
previous le
During playback, press V
on the remote control to go
to the next le.
Playing less than 2 seconds,
press C on the remote
control to go to the previous
le.
Playing after 3 seconds, press
C on the remote control
to go to the beginning of
the le.
Search for a
section within a
le
Press and hold
C/V
during playback and release it
at the point you want to listen
to. (except FLAC and OGG
les)
Play repeatedly
or randomly
Press REPEAT on the remote
control repeatedly, the
display will be changed in the
following order, OFF RPT 1
RPT DIR (DIRECTORY) RPT
ALL RANDOM.
Select a le
directly
Press 0 to 9 numerical buttons
on the remote control to go
to the desired le directly.
Search a folder
Press FOLDER
W/S
on the
remote control.
Resume
playback
This unit memorizes a current
song which is played before
changing the function or
turning o the unit.
y
The resume point may be cleared when you
pull out the power cord or removing the
USB device from the unit.
y
Repeat/Random playback operates as
follows.
On Display Description
OFF
Plays songs on USB
device in order.
RPT1
Plays a same song
repeatedly.
RPT DIR
Plays songs in a folder
repeatedly.
RPT ALL
Plays all the songs on
USB device repeatedly.
RANDOM Plays songs randomly.
,
Note
To Next Page
Loading...
Need help?
General
Weight and Dimensions
